F-200 Flanging Machine


Chamfering: 21,3–219,1 mm | .840”–8.625” OD
Expansion: Copper: 60–219,1 mm | 2.375”–8.625” OD
Flanging: 21,3–219,1 mm | .840”–8.625” OD
Pipe diameters: 21,3–219 mm | .840”–8.625” OD
Material: Stainless Steel, Copper, Carbon Steel, Aluminum, CuNi
Machine type: Industrial machines
Process: End forming

Most commonly used in:

      

F-200 Flanging Machine for both cold and hot forming

With the T-DRILL F-200 flanging machine lips and flanges are formed directly on the end of the pipe – a system that saves up to 40 % in time and costs compared with traditional weld neck flange connections.

Advantages of T-DRILL Flanging Machines:

  • Lower workshop costs due to elimination of welding and X-raying
  • Less working capital: no welding neck flange inventory or complex welding and X-raying equipment
  • Loose flanges for quick installation – no difficult bolt-hole positioning.
  • Precise results and constant high quality: no risk of weld or braze fractures
  • Cold and hot forming of long and bent pipes with smooth or grooved flanged surfaces.
  • Programmability for easy operation and practically no need for maintenance.

F-200 meets the major requirements of the chemical and food-processing industries, and of shipbuilding and pipe fabrication in general.

T-DRILL Flanging method is approved e.g. by:

  • Det Norske Veritas
  • Germanischer Lloyd
  • Lloyd’s Register of Shipping (Carbon Steel etc.)
  • Lloyd’s Register of Shipping (CuNi)
  • Bureau Veritas
  • ASTM
  • Pressure Equipment Directive (PED)

COMPARISON: Welded Fittings vs T-DRILL Collaring & Flanging